Archives

Die Cast Part Design

Die Cast Part Design

This course is for new and seasoned users alike that want to become experts at the Die Cast manufacturing process. The course material for this die casting part design workshop is designed to provide a working knowledge of the die cast molding industry. The bulk of the time in this workshop will be spent on the part design requirements imposed on the designer by the die casting process and the CAD design tool of choice.

Creo Simulate: Week-Long Workshop

Creo Simulate: Week-Long Workshop

This course is designed for new users who want to test, validate, and optimize Creo models & assemblies. Creo Simulate enables engineers to simulate structural and thermal loads on products. Participants will also complete comprehensive, hands-on lab exercises that simulate realistic analysis, and design optimization activities.

Creo 4.0 or Creo 5.0 Update Workshop

Creo 4.0 or Creo 5.0 Update Workshop

This Creo update training is designed for experienced users of older versions of pro engineer wildfire or Creo. Students will grasp parametric modeling techniques using the latest release of Creo (or other specified version as requested by student). Participants will study various new features and practice parametric modeling techniques to incorporate new functions into their workflow. Participants will compare and contrast differences of Wildfire 5.0 or earlier releases to Creo 3.0.

SolidWorks: Four Week Comprehensive

SolidWorks: Four Week Comprehensive

To perform in an engineering, mechanical design, or design engineer position around the world a candidate must be able to operate SolidWorks at a level above the competition to be seriously considered for a position. In this four week Solidworks course, we help design engineers and non degreed technicians alike learn Solidworks at a level that makes the participant gain expert status quickly.

Creo Level 8:  Schematics

Creo Level 8: Schematics

This serious introduction Creo Schematics course is either a two-day or five-day intensive. This course enables participants to experience and practice the fast and easy creation and modification of even the most sophisticated routed system wiring, piping, or block diagrams. This intense study multi-discipline workshop meets the functionality needs of piping as well as cabling design. The last days of this workshop will help users with Creo Schematics so they can not only drive the routing of cables and pipes but to make significant changes using re-output from Creo Schematics. This course is for both electrical engineers or CAD technicians who are tasked to manage teams or to rout cables from these schematics.

Creo Level 14: Advanced Sheet Metal

Creo Level 14: Advanced Sheet Metal

This is an advanced Creo Sheetmetal course. Example sheetmetal items are small battery contacts, aircraft mounting brackets, electronics enclosures, larger stove/oven components, or auto panels to name a few.

Creo Surfacing Level 2: Advanced Creo Surfacing

Creo Surfacing Level 2: Advanced Creo Surfacing

This advanced Creo training course is developed for more advanced surfacing modelers who want to become experts at using Creo Surfaces. In this course we help design engineers and industrial designers leverage parent child constraints and learn how to make changes quickly to set them up for becoming experts faster. Discuss the many different Creo surfacing styles and techniques. Force rounds with Surfaces and apply Creo Surfaces on Solid geometry. Parting lines on parting surfaces. Using Sweeps and blends. Using graph features, trajpar & evalgraph. We do not read to you from an exercise or a book.

Creo Surfacing: Week One

Creo Surfacing: Week One

This Creo Surfacing training workshop has been specifically designed for those designers and design engineers who want to gain a high level of understanding using Creo surfacing all in one week. This is one of Design-engine’s most popular workshops. This course is perfect for those non degreed contractors or design engineers looking to make top dollar as surfacing experts. The sooner you take this class the sooner you will be considered an expert at Creo surfacing.

Creo Surfacing: Week Two

Creo Surfacing: Week Two

This workshop has been specifically designed for those who have already taken the one week surfacing intensive from Design Engine and who want to take surface modeling in Creo even further. Be sure to phone conference with the instructors before the class so that they may incorporate your specifics into this course.

Manufacturing Week-Long Comprehensive Workshop

Manufacturing Week-Long Comprehensive Workshop

The course and course material is designed to provide a working knowledge of the metal forging industry. The class is intended for those designers and engineers who are designing forged parts using a parametric modeler.

Creo Surfacing: Week One

Creo Surfacing: Week One

This workshop has been specifically designed for designers and engineers who want to gain a high level of understanding using surfaces in just one week.

SolidWorks Level 2: Advanced Assembly & Detail Drawings

SolidWorks Level 2: Advanced Assembly & Detail Drawings

Introduction to constraint based modeling utilizing the latest release of SolidWorks.

Creo Surfacing Level 2: Advanced Surfacing

Creo Surfacing Level 2: Advanced Surfacing

Discuss the many different surfacing styles and techniques. Learn to create and modify Conics, Splines, Datum Curves, and Datum Points to discover unique modeling workflow. Push Graph Features and Trajpar Variables and learn to drive geometry appropriately with equations.

Creo NC: Prototype and Production Machining

Creo NC: Prototype and Production Machining

Creo NC is mainly used by mold makers and production and prototype machine shops. In addition, the Creo CNC eliminates the inaccuracies and inconvenience of exporting Creo geometry to third party machining software. Pro/NC is the premier programming system for families of parts with many variations of the same basic design.

Creo: Pro/PROGRAM Workshop

Creo: Pro/PROGRAM Workshop

In this course, you learn how to automate Creo using input variables supplied both inside and outside Creo in what was called Pro/PROGRAM. This class is for design engineers that want to automate configurations of design within or outside of Windchill.

Rhino Level 3: Flamingo Rendering

Rhino Level 3: Flamingo Rendering

General principles of rendering as it relates specifically to Rhino and Flamingo. Flamingo brings the features of AccuRender’s ray trace and radiosity rendering technology to Rhino.

Forging Part Design Workshop

Forging Part Design Workshop

The course and course is intended for design engineers interested in taking the forged manufacturing process and the use of CAID to the next level. The training material is designed to provide a working knowledge of the metal forging industry. The class is intended for designers and engineers who are designing forged parts using a parametric modeler.